[ { "product_id": "128", "product_title": "Lo-Chlor Starver", "product_content": "LO-CHLOR STARVER® POOL MAINTENANCE 1LITREThe ORIGINAL Patented Phosphate RemoverDesigned to be used as a maintenance and preventative solution this unique formulation is highly concentrated and is safe to use with fish, mammals and in aquariums. BenefitsRemoves phosphates (algae nutrients) Without phosphates, algae cannot grow New formulation Dramatically clarifies water giving instant satisfaction Does not cloud water (unlike other phosphate removers) Minimal filter pressure increase (see important notes below) Enhances chlorine production Enhances the performance of ALL other pool chemical treatments Compatible with all sanitisers (including Nature 2 and Ionisers) Important NotesShake container well before use Check filter pressure before you add Lo-Chlor Starver® Pool Maintenance If pressure is high, clean cartridge prior to adding Lo-Chlor Starver® Pool Maintenance Add directly to skimmer with filter running normally Can be used in freshwater\/saltwater aquariums, lakes and ponds Safe with fish and mammals Non-toxic and biodegradable Where do phosphates come from?Phosphates are organic building blocks that form when phosphoric acid reacts with various elements found in nature. Phosphates come from leaves, fertilizers, and bather wastes such as sweat and urine. Other phosphates sources are detergents, some insecticides, soft drinks, toothpaste and even some pool chemicals.How much phosphate is too much?As little as 0.2 ppm of phosphate can result in outbreaks. Interestingly, in cases where pools have excessive outbreaks, the test may register a very low or zero reading on the PhosphateTest Kits. This is because virtually all of the phosphate has been consumed. This phosphate is now organically bound and is not measured by the test. When outbreaks are treated (superchlorination and \/ or the addition of a Lo-Chlor Algaecide), this organically bound phosphate will be released into the water. Dosage ChartsINITIAL DOSEAdd STARVER® at a rate of 500ml per 50,000 Litres of pool water every 2-3 days. (If Phosphate level is 1ppm or higher, it is recommended to use companion product STARVER®X to reduce levels to beneath1ppm then to recommence using STARVER®) The required dosage of STARVER®should be added until you nish the container you have been supplied. Once you have completed the treatment, take a water sample to be tested for phosphates by your local pool professional. MAINTENANCE DOSEOnce you have achieved the desired phosphate level (0-0.2 ppm) , a regular maintenance dose of STARVER® shouldbe applied. Add a regular maintenance dose of 500ml of STARVER® per 50,000 Litres pool water every 2 weeks. REGULAR PHOSPHATE CHECKS should be carried out by your local pool professional.", "product_order": "1", "product_icon": "\/media\/commerce_products\/128\/lochlor-starver.jpg", "product_brand_id": "9", "product_price": "0.0000", "product_price_ex_tax": 0, "product_price_local_tax": "0.0000", "product_created_datetime": "2020-06-26 00:00:00", "product_code": "", "product_barcode": "", "product_is_unorderable": "0", "product_is_shipping_required": "0", "product_inventory_level": null, "product_uri": "\/products\/lo-chlor-lo-chlor-starver\/" }, { "product_id": "129", "product_title": "LoChlor Starver M", "product_content": "State of the art phosphate remover for maintaining low levels of phosphateThis highly concentrated formulation from Lo-Chlor Chemicals is a uniquely formulated phosphate remover which removes up to 2 parts per million with one dose and maintains low levels of phosphates with minimal fuss. Features & BenefitsSimple, easy application directly through the skimmer No sediment so no need to shake before use A single dose of 250mls will remove up to 2 ppm (parts per million) of phosphates from swimming pool water Natural composition of unique polymers and rare earth compounds. Built in clarifier gives superior look to water quality Does NOT cloud pool water like other phosphate removers Increases efficiency of all sanitisers Increases the efficiency of salt water chlorinators No need to vacuum (does not settle out in pool) No effect on filter pressure DosageAdd 250mls once per week for every 50,000 Litres pool water A few facts from the professionals...Starver®M is a maintenance solution designed to be used in conjunction with Starver®X which is a high level bulk phosphate remover. For very high levels of phosphates (over 2 parts per million) we recommend first adding 1 Litre of Starver®X per 50,000 Litre pool water. Once the phosphate level is below 2 parts per million you can then begin a maintenance program using Starver®M at the dosage rate stated above. Starver®M will not clog filters and will not increase filter pressure. Unlike other phosphate removers on the market that have not been formulated to the same high standard of Starver M, it will NOT cloud the pool water so there is no need to add clarifiers following the use of Starver®M. Ensure you regularly test the pool for phosphates and keep water balance in order. Starver®M is compatible with all registered sanitisers and does not affect probes on automatic liquid feeders or other dosing units.", "product_order": "2", "product_icon": "\/media\/commerce_products\/129\/lochlor-starver-m.jpg", "product_brand_id": "9", "product_price": "0.0000", "product_price_ex_tax": 0, "product_price_local_tax": "0.0000", "product_created_datetime": "2020-06-26 00:00:00", "product_code": "", "product_barcode": "", "product_is_unorderable": "0", "product_is_shipping_required": "1", "product_inventory_level": null, "product_uri": "\/products\/lo-chlor-lochlor-starver-m\/" }, { "product_id": "130", "product_title": "LoChlor Starver X", "product_content": "LO-CHLOR STARVER® ‘X’ 1LITREThe next generation in phosphate removal technologyThis highly concentrated formulation from Lo-Chlor Chemicals is a uniquely formulated phosphate remover which removes high levels of phosphates than any other product Features & Benefits— Removes up to 6.0 parts per million (6000 parts per billion) of phosphates — Natural composition of unique polymers and rare earth compounds — Enhances water clarity within 24 hours — Increases efficiency of all sanitisers — Increases the efficiency of salt water chlorinators — No need to vacuum (does not settle out in pool) — No effect on filter pressure — Compatible with all pool treatments and equipment DosageAdd 200mls per 10,000 Litres directly to the skimmer box  A few facts from the professionals...1. When adding Starver®X the water might go cloudy. This cloudiness will disappear within 24 hours as long as the pump and filter are left to run. 2. Starver®X does not replace the need for a phosphate removal program. 3. After the addition of Starver®X regular maintenance dosages of Starver® Pool Maintenance should be added at a fortnightly rate of 500mls per 50,000L. 4. Ensure you regularly test the pool for phosphates and keep water balance in order. 5. Starver®X is compatible with all registered sanitisers and does not affect probes on automatic liquid feeders or other dosing units", "product_order": "3", "product_icon": "\/media\/commerce_products\/130\/lochlor-starver-x.jpg", "product_brand_id": "9", "product_price": "0.0000", "product_price_ex_tax": 0, "product_price_local_tax": "0.0000", "product_created_datetime": "2020-06-26 00:00:00", "product_code": "", "product_barcode": "", "product_is_unorderable": "0", "product_is_shipping_required": "1", "product_inventory_level": null, "product_uri": "\/products\/lo-chlor-lochlor-starver-x\/" } ]