<?xml version="1.0" encoding="UTF-8"?>
<root>
  <product>
    <product_id>222</product_id>
    <product_title><![CDATA[Hide Linear Drain Cover | Poured Concrete]]></product_title>
    <product_content><![CDATA[## Premium Strip Drainage, Finished in Poured Concrete HIDE Linear Drain Covers (also known as strip drains, channel drains or trench drains) deliver premium outdoor drainage for landscaping and pool areas — with a clean, seamless finish and no visible drain grate. The poured concrete model is designed to be filled in-situ with wet-pour concrete, allowing the drainage line to blend invisibly into concrete driveways, patios, pool surrounds and paved areas. ### Why Choose a HIDE Poured Concrete Linear Drain Cover? Seamless, designer finish — filled with wet-pour concrete to match your slab or paved surround, so the strip drain becomes invisible in the landscape. Built for concrete surrounds — the dedicated concrete infill model suits the common 40mm depth, making it the perfect partner for concrete pool surrounds, driveways and entertaining areas. Smart 1210mm set-out — supplied in easily removed modular lengths that are easy to trim on-site (a stainless steel cutting disc is included) for a perfect fit, including irregular edges. Adjustable height & clearances — centralising tabs (a world-first in design) allow up to 10mm height adjustment, with level adjusters and adhesive included to secure components. No equipotential bonding required — simplifying installation around pools. Built to last — 316 marine grade stainless steel backed by a 20 year warranty. Flexible layout options — prefabricated 90° mitred corner kits, optional stainless tile edge trims, and easily removable modular lengths for maintenance access. ### Channel Compatibility & Set-Out 125mm width suits Everhard Easy Drain (ED) channels Set the channel at slab level (tile-fixing height) so the HIDE cover sits flush with the finished concrete surface — the cover sits above the channel Please note: the plastic drain channel (Everhard Easy Drain) is not supplied with the HIDE kit — purchase it separately and install according to the manufacturer's instructions. Confirm with your concrete contractor or pool builder that they understand the installation method and required set-out height before fixing the channel. ### What's Included in the HIDE Linear Drain System? #### Linear Lid Kit (per 1210mm length) 1 × linear lid 1210mm 5 × linear bridges 5 × height/level levellers 2 × adhesive #### Mitred Corner Kit (optional) 1 × left-hand and 1 × right-hand mitred corner lid 8 × linear bridges & levellers, 1 × corner bridge & leveller 4 × adhesive #### Finishing Kit (one per project) 1 × access key / tab key 2 × end caps to finish both ends of the completed channel cover 1 × stainless steel cutting disc Tip: you only need one key hole per multi-length drain run — the remaining covers can be lifted once the first length is removed. ### HIDE Poured Concrete Linear Drain Covers — FAQs #### What is a HIDE poured concrete linear drain cover? It is a stainless steel cover for strip (channel) drainage that is filled in-situ with wet-pour concrete. Instead of a visible metal or plastic grate, the drainage line blends seamlessly into concrete driveways, patios and pool surrounds. #### How is the poured concrete model different from the tile inlay model? Both share the same 1210mm modular 316 stainless steel lid system. The poured concrete model is a dedicated 40mm depth lid designed to be filled with wet-pour concrete on-site, whereas the tile inlay range offers depths to suit 10, 20, 30 and 40mm tile or stone thicknesses. #### Which drain channels is it compatible with? The 125mm width suits Everhard Easy Drain (ED) channels. The plastic drain channel is not included — purchase it separately and install it to the manufacturer's instructions, set at slab level so the HIDE cover sits flush with the finished surface. #### How do I pour the concrete infill? Install the channel and HIDE lid set at slab level, then pour your concrete finish over the surrounding area and into the lid recess as one pour. The modular lengths are easily removed for maintenance access once the concrete has cured. #### Can the covers handle corners? Yes. A prefabricated 90° mitred corner kit is available, containing left-hand and right-hand mitred corner lids with the required bridges, levellers and adhesive — ideal for drainage runs that turn around pools, driveways or paving edges. #### Do HIDE linear drain covers need bonding or earthing? No equipotential bonding is required, simplifying installation around pools and outdoor living areas.#### What warranty do HIDE linear drain covers have? HIDE linear drain covers are made from marine grade 316 stainless steel and backed by a 20 year warranty — a set-and-forget product compared to traditional strip drain grates that corrode and detract from your landscape design. ### Order HIDE Linear Drain Covers from Aqua Clear Achieve premium strip drainage without a visible grate. More product details, the brochure, installation guides and videos can be found at [www.skimmerlids.com.au](https://www.skimmerlids.com.au), or talk to our knowledgeable team about the right configuration for your project.]]></product_content>
    <product_order>8</product_order>
    <product_icon>/media/commerce_products/222/Concrete-Linear-Drain.webp</product_icon>
    <product_brand_id>11</product_brand_id>
    <product_price>0.0000</product_price>
    <product_price_ex_tax>0</product_price_ex_tax>
    <product_price_local_tax>0.0000</product_price_local_tax>
    <product_created_datetime>2026-09-17 20:30:32</product_created_datetime>
    <product_code></product_code>
    <product_barcode></product_barcode>
    <product_is_unorderable>0</product_is_unorderable>
    <product_is_shipping_required>1</product_is_shipping_required>
    <product_uri>/products/hide-hide-linear-drain-cover-poured-concrete/</product_uri>
  </product>
  <product>
    <product_id>221</product_id>
    <product_title><![CDATA[Hide Lineal Drain Cover | Tile Inlay]]></product_title>
    <product_content><![CDATA[## Strip Drainage With No Visible Grate HIDE Linear Drain Covers (also known as strip drains, channel drains or trench drains) deliver premium outdoor drainage for landscaping and pool areas — with a clean, seamless finish and no visible drain grate. Each tile insert cover is supplied in 1210mm modular lengths in marine grade 316 stainless steel, ready to be inlaid with your choice of matching tile, stone or pavers so the drainage line blends invisibly into patios, pool surrounds and landscaped areas.### Why Choose a HIDE Linear Drain Cover? Seamless, designer finish — inlay the cover with your selected tile, stone or paver finish so the strip drain becomes invisible in the landscape. Smart 1210mm set-out — aligns naturally with common tile layouts: 3 × 400mm tiles + grout, or 2 × 600mm tiles + grout. Lengths are easy to trim on-site (a stainless steel cutting disc is included) for a perfect fit, including crazy pave and irregular stone edges. Four inlay depths — covers suit 10, 20, 30 and 40mm tile or stone thicknesses (8mm–42mm range), with an optional wet-pour concrete infill model at 40mm depth. Adjustable height & clearances — centralising tabs (a world-first in design) allow up to 10mm height adjustment, with level adjusters and adhesive included to secure components. No equipotential bonding required — simplifying installation around pools. Built to last — 316 marine grade stainless steel backed by a 20 year warranty. Flexible layout options — prefabricated 90° mitred corner kits, optional stainless tile edge trims, and easily removable modular lengths for maintenance access. ### HIDE Linear Drain Covers in Action ### Channel Compatibility & Set-Out 125mm width suits Everhard Easy Drain (ED) channels 112mm width suits Reln Storm Mate (SM) channels Set the channel at tile-fixing height (slab level) so the HIDE cover sits flush with the finished surface — the cover sits above the channel Please note: the plastic drain channel (Everhard or Reln) is not supplied with the HIDE kit — purchase it separately and install according to the manufacturer's instructions. Confirm with your tiler that they understand the installation method and required set-out height before fixing the channel.### What's Included in the HIDE Linear Drain System? #### Linear Lid Kit (per 1210mm length) 1 × linear lid 1210mm 5 × linear bridges 5 × height/level levellers 2 × adhesive #### Mitred Corner Kit (optional) 1 × left-hand and 1 × right-hand mitred corner lid 8 × linear bridges & levellers, 1 × corner bridge & leveller 4 × adhesive #### Finishing Kit (one per project) 1 × access key / tab key 2 × end caps to finish both ends of the completed channel cover 1 × stainless steel cutting disc Tip: you only need one key hole per multi-length drain run — the remaining covers can be lifted once the first length is removed.### HIDE Linear Drain Covers — FAQs #### What is a HIDE linear drain cover? A HIDE linear (strip) drain cover is a stainless steel cover for channel drainage that is inlaid with your choice of tile, stone or pavers. Instead of a visible metal or plastic grate, the drainage line blends seamlessly into patios, pool surrounds and landscaped areas.#### What lengths are HIDE linear drain covers available in? Covers are supplied in easily removed modular lengths of 1210mm. This length aligns with common tile set-outs (3 × 400mm tiles plus grout, or 2 × 600mm tiles plus grout) and can be trimmed on-site with the included stainless steel cutting disc for a custom fit.#### Which drain channels are HIDE linear drain covers compatible with? The 125mm width suits Everhard Easy Drain (ED) channels and the 112mm width suits Reln Storm Mate (SM) channels. Note that the plastic drain channel is not included — purchase it separately and install it to the manufacturer's instructions, set at slab level so the HIDE cover sits flush with the finished surface.#### What inlay thicknesses do the covers suit? Covers are available in four depths to suit 10, 20, 30 and 40mm tile or stone (covering thicknesses from 8mm to 42mm), with an optional wet-pour concrete infill model at 40mm depth compatible with Everhard Easy Drain channels.#### Can HIDE linear drain covers handle corners? Yes. A prefabricated 90° mitred corner kit is available, containing left-hand and right-hand mitred corner lids with the required bridges, levellers and adhesive — ideal for drainage runs that turn around pools or paving edges.#### Do HIDE linear drain covers need bonding or earthing? No equipotential bonding is required for HIDE linear drain covers, simplifying installation around pools and outdoor living areas.#### What warranty do HIDE linear drain covers have? HIDE linear drain covers are made from marine grade 316 stainless steel and backed by a 20 year warranty — a set-and-forget product compared to traditional strip drain grates that corrode and detract from your landscape design.### Order HIDE Linear Drain Covers from Aqua Clear Achieve premium strip drainage without a visible grate. More product details, the brochure, installation guides and videos can be found at [www.skimmerlids.com.au](https://www.skimmerlids.com.au), or talk to our knowledgeable team about the right configuration for your project.]]></product_content>
    <product_order>7</product_order>
    <product_icon>/media/commerce_products/221/Linear-Drain-Cover-2-600x600.jpg</product_icon>
    <product_brand_id>11</product_brand_id>
    <product_price>0.0000</product_price>
    <product_price_ex_tax>0</product_price_ex_tax>
    <product_price_local_tax>0.0000</product_price_local_tax>
    <product_created_datetime>2026-09-17 20:19:02</product_created_datetime>
    <product_code></product_code>
    <product_barcode></product_barcode>
    <product_is_unorderable>0</product_is_unorderable>
    <product_is_shipping_required>1</product_is_shipping_required>
    <product_uri>/products/hide-lineal-drain-cover/</product_uri>
  </product>
  <product>
    <product_id>181</product_id>
    <product_title><![CDATA[Hide Manhole Covers]]></product_title>
    <product_content><![CDATA[## Large Access, Zero Visual Impact HIDE Manhole Covers are the perfect way to cover unsightly manholes and large service points, blending them seamlessly into your choice of surround. These large external access covers allow hidden entry to big service and inspection points — without an ugly concrete or cast-iron lid spoiling your landscape design.Made from marine grade 316L stainless steel and available in two square sizes (506mm and 656mm) with a choice of 20mm or 30mm depths, each cover is filled on-site with your choice of matching tile, stone, pavers, concrete or decking. The tray holds your inlay material so patterns run uninterrupted — even herringbone and crazy paving layouts continue right through the lid. ### Why Choose a HIDE Manhole Cover? Seamless, designer finish — the inlay tray holds the same tile, paver, stone, concrete or decking as your surrounds, so the manhole simply disappears into the landscape. Safe, key-only access — the cover can only be opened with the HIDE Safety Key, keeping children and pets out, and sits flush to eliminate trip hazards in pedestrian areas. Built to last — marine grade 316L stainless steel backed by a 20 year warranty covering the Safety Key, Inlay Lid and Edge Protector. Protects your landscape — the stainless steel edge protector prevents chips and breakages in tiled or stone surrounds every time the cover is opened and closed. Works in new or existing landscapes — install in new builds or retrofit into existing pool surrounds and outdoor areas. ### What's Included in Every HIDE Manhole Cover Kit? HIDE Safety Key — a stainless steel tool to safely and easily open and close the installed cover. HIDE Inlay Lid — a 316 stainless steel tray that holds the landscape materials of your choice. HIDE Edge Protector — a stainless steel frame set into a recess in the landscaped area, protecting your paving and surrounds from chipping or breakage. HIDE Adhesive & documentation — plus contractor installation instructions, home owner information and warranty. ### Choosing the Right Size & Depth Two quick measurements are all it takes: the clear underside opening you need to cover, and the thickness of your inlay material. Manhole covers are available in 506mm and 656mm square, in 20mm and 30mm depths to suit common tile, paver and concrete thicknesses. The 656mm lid is also available in a drain cover configuration for surface water applications. If your cover will sit within 1.25m of the pool edge, the stainless steel should be earthed — check with your licensed electrician. Not sure which kit you need? Contact our team with your measurements and we'll recommend the right one. ### HIDE Manhole Covers — FAQs #### What is a HIDE manhole cover? A HIDE manhole cover is a large, stainless steel inlay cover that conceals big service and inspection points in outdoor areas. The tray is filled with the same tile, paver, stone, concrete or decking as your surrounds, creating a flush, invisible finish that can only be opened with the HIDE Safety Key. #### What sizes and depths do HIDE manhole covers come in? HIDE manhole covers are available in two square sizes — 506mm and 656mm — each with a choice of 20mm or 30mm depths to suit common inlay thicknesses. The 656mm lid is also available in a drain cover configuration. #### What inlay materials can I use in a HIDE manhole cover? You can inlay whatever material matches your surrounds — tiles, stone, pavers, decking or wet-pour concrete. Patterns like herringbone and crazy paving continue right through the lid for a truly seamless result. #### Are HIDE manhole covers pool safety compliant? Yes. HIDE's patented operating system provides child-resistant, key-only access — the cover cannot be removed manually — keeping it compliant with pool safety standards. Because it sits flush with the surrounds, it also removes the trip hazard of traditional access lids. #### Do HIDE manhole covers need to be earthed? Stainless steel covers should be earthed if they will sit within 1.25m of the pool edge — check with a licensed electrician if you're unsure. HIDE also offers polymer options where earthing isn't achievable. #### Can a HIDE manhole cover be retrofitted to an existing landscape? Absolutely. HIDE manhole covers can be installed in new landscapes or retrofitted into existing pool surrounds and outdoor areas. They're designed for quick, affordable installation by a contractor, and each kit contains all the components required. #### What warranty do HIDE manhole covers have? HIDE manhole covers are made from marine grade 316L stainless steel and backed by a 20 year warranty covering the Safety Key, Inlay Lid and Edge Protector — a set-and-forget product compared to traditional lids that rust, crack and need regular replacement. ### Order HIDE Manhole Covers from Aqua Clear Add hidden, flush-finish access to large service points without compromising your design. More product details, sizing guides, brochures and technical videos can be found at [www.skimmerlids.com.au](https://www.skimmerlids.com.au), or talk to our knowledgeable team about the right kit for your project.]]></product_content>
    <product_order>6</product_order>
    <product_icon>/media/commerce_products/181/Hide-Drain-Cover.png</product_icon>
    <product_brand_id>11</product_brand_id>
    <product_price>0.0000</product_price>
    <product_price_ex_tax>0</product_price_ex_tax>
    <product_price_local_tax>0.0000</product_price_local_tax>
    <product_created_datetime>2024-03-21 00:49:51</product_created_datetime>
    <product_code></product_code>
    <product_barcode></product_barcode>
    <product_is_unorderable>0</product_is_unorderable>
    <product_is_shipping_required>0</product_is_shipping_required>
    <product_uri>/products/manhole-covers/</product_uri>
  </product>
  <product>
    <product_id>172</product_id>
    <product_title><![CDATA[Hide Drain Covers]]></product_title>
    <product_content><![CDATA[## Conceal Unsightly Drain Grates — Seamlessly HIDE Drain Cover Kits replace dated plastic drain covers and coarse metal grates with a premium, flush-finish inlay lid that blends perfectly into your chosen surface. Made from marine grade 316L stainless steel and filled with your choice of matching tile, stone, pavers, concrete or decking, the cover simply disappears into your pool deck, patio or landscape — no more industrial eyesores stamping your outdoor design.Designed for installation in pedestrian alfresco areas and suited to a mortar gradient to the pipe, HIDE drain covers are available in four sizes with multiple depths to accommodate any type of inlay. Please note: the drain and pit are not included — these are cover kits only, installed on-site over your drainage pipe.### Why Choose a HIDE Drain Cover? Seamless, designer finish — the inlay tray holds the same tile, paver, stone, concrete or decking as your surrounds, creating a flush surface with no visible grate. Safe, key-only access — the cover can only be opened with the HIDE Safety Key, keeping children and pets out, and sits flush to eliminate trip hazards in pedestrian areas. Built to last — marine grade 316L stainless steel backed by a 20 year warranty covering the Safety Key, Inlay Lid and Edge Protector. Protects your landscape — the stainless steel edge protector prevents chips and breakages in tiled or stone surrounds every time the cover is opened and closed. Set-and-forget — occasional maintenance only, at little to no cost, unlike cheap plastic grates that crack and need regular replacement. ### Choosing the Right Size & Depth Four drain cover sizes are available, each in a range of depths to suit your inlay material:214mm square — 10, 20, 30 & 40mm depths 314mm square — 10, 20, 30, 40, 50 & 60mm depths 342mm square — 10, 20, 30 & 40mm depths 656mm square — 20mm depth Concrete models (40mm depth) available in 214, 314 & 342mm Two quick measurements are all it takes: the clear underside opening you need to cover, and the thickness of your inlay material. If your cover will sit within 1.25m of the pool edge, the stainless steel should be earthed — check with your licensed electrician. For drainage volume planning, a drain cover flow rate guide is available at skimmerlids.com.au. Not sure which kit you need? Contact our team with your measurements and we'll recommend the right one.### What's Included in Every HIDE Drain Cover Kit? HIDE Safety Key — a stainless steel tool to safely and easily open and close the installed cover. HIDE Inlay Lid — a 316 stainless steel tray that holds the landscape materials of your choice. HIDE Edge Protector — a stainless steel frame set into a recess in the landscaped area, protecting your paving and surrounds from chipping or breakage. HIDE Adhesive & documentation — plus contractor installation instructions, home owner information and warranty. ### HIDE Drain Covers — FAQs #### What is a HIDE drain cover? A HIDE drain cover is a stainless steel inlay cover that conceals surface water drains in outdoor areas. The tray is filled with the same tile, paver, stone, concrete or decking as your surrounds, creating a flush, invisible finish that can only be opened with the HIDE Safety Key to access the drain below.#### What sizes and depths do HIDE drain covers come in? HIDE drain covers are available in four square sizes — 214mm (10/20/30/40mm depths), 314mm (10–60mm depths), 342mm (10/20/30/40mm depths) and 656mm (20mm depth) — with concrete models at 40mm depth in 214, 314 and 342mm. The range of depths suits most inlay materials.#### Does the drain cover include the drain or pit? No. HIDE drain cover kits supply the cover only — the drain and pit are not included. The cover is designed to be installed on-site over your drainage pipe, suiting a mortar gradient to the pipe.#### Are HIDE drain covers suitable for pedestrian areas? Yes. HIDE drain covers are designed for installation in pedestrian alfresco areas handling patio surface water only. They sit flush with the surround — eliminating the trip hazard of raised grates — and can only be opened with the HIDE Safety Key.#### Do HIDE drain covers need to be earthed? Stainless steel covers should be earthed if they will sit within 1.25m of the pool edge — check with a licensed electrician if you're unsure. HIDE also offers polymer and combination options where earthing isn't achievable.#### Can a HIDE drain cover be retrofitted to an existing landscape? Absolutely. HIDE drain covers can be installed in new landscapes or retrofitted into existing pool surrounds, patios and courtyards. They're designed for quick, affordable installation by a contractor, and each kit contains all the components required.#### What warranty do HIDE drain covers have? HIDE drain covers are made from marine grade 316L stainless steel and backed by a 20 year warranty covering the Safety Key, Inlay Lid and Edge Protector — a set-and-forget product compared to cheap plastic grates that crack and need regular replacement.### Order HIDE Drain Covers from Aqua Clear Complete the seamless look of your next pool or landscaping project. More product details, sizing tables, the drain cover flow rate guide, brochures and technical videos can be found at [www.skimmerlids.com.au](https://www.skimmerlids.com.au), or talk to our knowledgeable team about the right kit for your project.]]></product_content>
    <product_order>5</product_order>
    <product_icon>/media/commerce_products/172/small-drain-cover.webp</product_icon>
    <product_brand_id>11</product_brand_id>
    <product_price>0.0000</product_price>
    <product_price_ex_tax>0</product_price_ex_tax>
    <product_price_local_tax>0.0000</product_price_local_tax>
    <product_created_datetime>2024-03-06 22:04:31</product_created_datetime>
    <product_code></product_code>
    <product_barcode></product_barcode>
    <product_is_unorderable>0</product_is_unorderable>
    <product_is_shipping_required>0</product_is_shipping_required>
    <product_uri>/products/hide-drain-covers/</product_uri>
  </product>
  <product>
    <product_id>171</product_id>
    <product_title><![CDATA[Hide Exterior Access Covers]]></product_title>
    <product_content><![CDATA[## Conceal Every Service Point — Seamlessly HIDE Exterior Access Covers are the perfect choice when concealing service points in outdoor areas, as they blend seamlessly into your selected surface. Made from marine grade 316L stainless steel and filled with your choice of matching tile, stone, pavers, concrete or decking, each cover sits flush with your pool deck or landscape — no more ugly plastic access plates or industrial grates spoiling the view.Available in a wide range of sizes — 156mm, 206mm, 256mm, 306mm, 342mm and 412mm square, plus two large manhole sizes (506mm and 656mm square) — and a range of depths to suit most applications. A full polymer access cover is also available for installations where earthing is not achievable.### Access Covers Conceal Entry to All Service Points, Such As: Pool skimmer boxes IO & bolted trap screw (BTS) Water table pipes Water and balance tanks Taps and irrigation Valves and meters Electrical junction boxes ### Why Choose a HIDE Access Cover? Seamless, designer finish — the inlay tray holds the same tile, paver, stone, concrete or decking as your surrounds, and the cover maintains uninterrupted board lines even in decking. Safe, key-only access — covers can only be opened with the HIDE Safety Key, keeping children and pets out of service points, and sit flush to eliminate trip hazards in pedestrian alfresco areas. Built to last — marine grade 316L stainless steel backed by a 20 year warranty covering the Safety Key, Inlay Lid and Edge Protector. Protects your landscape — the stainless steel edge protector prevents chips and breakages in tiled or stone surrounds every time the cover is opened and closed. Set-and-forget — occasional maintenance only, at little to no cost, unlike cheap lids that need regular replacement. ### What's Included in Every HIDE Access Cover Kit? HIDE Safety Key — a stainless steel tool to safely and easily open and close the installed cover. HIDE Inlay Lid — a 316 stainless steel tray that holds the landscape materials of your choice. HIDE Edge Protector — a stainless steel frame set into a recess in the landscaped area, protecting your coping and surrounds from chipping or breakage. HIDE Adhesive & documentation — plus contractor installation instructions, home owner information and warranty. ### Choosing the Right Size & Depth Two quick measurements are all it takes: the clear underside opening you need to cover, and the thickness of your inlay material. HIDE access covers are available in a range of depths (from 10mm to 60mm) so the finished surface sits perfectly flush with your pool deck, paving or decking. If your cover will sit within 1.25m of the pool edge, the stainless steel should be earthed — check with your licensed electrician, or choose the polymer option where earthing isn't achievable. Not sure which kit you need? Contact our team with your measurements and we'll recommend the right one.### HIDE Access Covers — FAQs #### What is a HIDE exterior access cover? A HIDE access cover is a stainless steel inlay cover that conceals service points in outdoor areas — such as pool skimmer boxes, valves, meters, water tanks, taps, irrigation and electrical junction boxes. The tray is filled with the same tile, paver, stone, concrete or decking as your surrounds, creating a flush, invisible finish opened only with the HIDE Safety Key.#### What sizes do HIDE access covers come in? HIDE access covers are available in 156mm, 206mm, 256mm, 306mm, 342mm and 412mm square sizes, plus two large manhole sizes — 506mm and 656mm square — and a range of depths from 10mm to 60mm to suit most inlay materials and applications.#### Do HIDE access covers need to be earthed? Stainless steel covers should be earthed if they will sit within 1.25m of the pool edge — check with a licensed electrician if you're unsure. If earthing isn't achievable, a full polymer access cover is available that requires no earthing at all.#### Can HIDE access covers be used in decking? Yes. HIDE access covers work beautifully with timber and composite decking — the inlay tray holds your decking material so the board lines run uninterrupted through the cover, with only a discreet key access point visible.#### Are HIDE access covers safe for pedestrian areas? Yes. HIDE covers are designed for installation in pedestrian alfresco areas. They sit flush with the surround — eliminating the trip hazard of traditional access grates — and can only be opened with the HIDE Safety Key, keeping children and pets out.#### Can a HIDE access cover be retrofitted to an existing landscape? Absolutely. HIDE access covers can be installed in new landscapes or retrofitted into existing pool surrounds and outdoor areas. They're designed for quick, affordable installation by a contractor, and each kit contains all the components required.#### What warranty do HIDE access covers have? HIDE access covers are made from marine grade 316L stainless steel and backed by a 20 year warranty covering the Safety Key, Inlay Lid and Edge Protector — a set-and-forget product compared to cheap plastic lids that crack and need regular replacement.### Order HIDE Access Covers from Aqua Clear Conceal every service point in your next pool or landscaping project without compromising the design. More product details, sizing tables, brochures and technical videos can be found at [www.skimmerlids.com.au](https://www.skimmerlids.com.au), or talk to our knowledgeable team about the right kit for your project.]]></product_content>
    <product_order>4</product_order>
    <product_icon>/media/commerce_products/171/Hide-exterior-access-cover.webp</product_icon>
    <product_brand_id>11</product_brand_id>
    <product_price>0.0000</product_price>
    <product_price_ex_tax>0</product_price_ex_tax>
    <product_price_local_tax>0.0000</product_price_local_tax>
    <product_created_datetime>2024-03-06 21:35:10</product_created_datetime>
    <product_code></product_code>
    <product_barcode></product_barcode>
    <product_is_unorderable>0</product_is_unorderable>
    <product_is_shipping_required>1</product_is_shipping_required>
    <product_uri>/products/hide-exterior-access-covers/</product_uri>
  </product>
  <product>
    <product_id>170</product_id>
    <product_title><![CDATA[Hide Polymer Combo Skimmer Lid]]></product_title>
    <product_content><![CDATA[## The Best of Both Worlds — Stainless Strength, No Earthing Required The HIDE Combination (Hybrid) Skimmer Lid pairs the proven strength of a 316 stainless steel inlay lid with a colour-matched, non-conductive polymer edge protector. The polymer frame fully insulates the stainless lid, so no earthing (bonding) is required — while the polymer colour blends into your surrounding grout and tile tones for a cohesive, seamless landscape finish.Once installed, only the very top edge (around 2mm) of the kit is visible — which is exactly why the Ash, Bone or Charcoal polymer frame integrates so effortlessly into your pool surround. Fill the lid with matching tile, stone, pavers or concrete and it simply disappears.Available in our most popular sizes — 342mm and 306mm skimmer lids plus a matching 206mm access cover — with 20mm and 30mm inlay depths (and a 40mm concrete infill option in Ash). Install in new applications or when refinishing; every HIDE kit contains all the components for quick, affordable, no-fuss installation on-site by a contractor.### Why Choose a HIDE Combination Skimmer Lid? Stainless steel strength, bond-free design — the durable 316 stainless steel lid is insulated by the non-conductive polymer frame, so it never needs earthing. Truly invisible finish — with only around 2mm of the frame visible once installed, the colour-matched polymer disappears into your grout and tile tones. Superior pool safety — the lid can only be opened with the HIDE Safety Key and cannot be lifted by hand, keeping it compliant with pool safety standards. Sitting flush with the surround, it also eliminates trip hazards. Built to last — backed by a 20 year warranty on the stainless steel lid and a 5 year UV-rated warranty on polymer components. No fragile moving parts — discrete key access with a simple, reliable operating system. ### What's Included in Every HIDE Combination Kit? HIDE Safety Key — a stainless steel tool to safely and easily open and close the installed lid. 316 Stainless Steel Inlay Lid — a robust tray that holds the landscape materials of your choice. Colour-Matched Polymer Edge Protector — a non-conductive frame (Ash, Bone or Charcoal) set into a recess in the landscaped area, insulating the lid and protecting your coping and surrounds from chipping. ### Choosing the Right Size, Depth & Colour Two quick measurements are all it takes: the clear underside opening of your skimmer box, and the thickness of your inlay material. Combination kits are available in 20mm and 30mm depths to suit common tile and paver thicknesses, plus a 40mm concrete infill option (Ash). Choose the polymer colour closest to your grout or tile undertone — warm beige/cream finishes suit Bone, cool grey tones suit Ash, and dark charcoal or graphite pavers suit Charcoal. Not sure? Contact our team with your measurements and we'll recommend the right kit.### HIDE Combination Skimmer Lids — FAQs #### What is a HIDE Combination (hybrid) skimmer lid? The HIDE Combination kit is a hybrid skimmer lid that pairs a 316 stainless steel inlay lid with a colour-matched, non-conductive polymer edge protector. You get the strength and durability of stainless steel with the bond-free convenience of polymer, finished flush with your tile, paver, stone or concrete surround.#### Does the Combination skimmer lid need to be earthed? No. The polymer edge protector fully insulates the stainless steel lid, so no electrical bonding (earthing) is required. This makes Combination kits ideal for renovations and other installations where earthing is difficult or unachievable.#### How is the Combination lid different from the Full Polymer and full stainless versions? The Combination lid uses a 316 stainless steel lid (20 year warranty) with a polymer frame (5 year UV-rated warranty), so it never needs earthing. The Full Polymer version is polymer throughout, while the full stainless steel range offers maximum corrosion resistance but requires earthing by a licensed electrician.#### Are HIDE Combination skimmer lids pool safety compliant? Yes. HIDE's patented operating system provides child-resistant, key-only access — the lid cannot be removed manually — keeping it compliant with pool safety standards. Because it sits flush with the surrounds, it also removes the trip hazard of a raised plastic skimmer lid.#### Can a HIDE Combination skimmer lid be retrofitted to an existing pool? Absolutely. HIDE Combination kits can be installed in new landscapes or retrofitted into existing pool surrounds. They're designed for quick, affordable installation by a contractor, and each kit contains all the components required.#### What inlay materials and thicknesses can I use? You can inlay whatever material matches your surrounds — tiles, stone, pavers or wet-pour concrete. Kits are available in 20mm and 30mm depths for tile and stone, with a 40mm concrete infill option (Ash) for thicker applications, so the finished lid sits perfectly flush.#### Which colour should I choose — Ash, Bone or Charcoal? Choose the colour that best suits the undertone of your surrounding finish: warm beige or cream tiles pair well with Bone, cool grey tones with Ash, and dark charcoal or graphite pavers with Charcoal. Because only about 2mm of the frame is visible once installed, matching it to your grout gives the most seamless result.### Order HIDE Combination Skimmer Lids from Aqua Clear Get the best of both worlds — stainless steel strength with a no-earthing-required polymer base. More product details, sizing guides, brochures and technical videos can be found at [www.skimmerlids.com.au](https://www.skimmerlids.com.au), or talk to our knowledgeable team about the right kit for your project.]]></product_content>
    <product_order>3</product_order>
    <product_icon>/media/commerce_products/170/hide-combination-skimmer-lid.webp</product_icon>
    <product_brand_id>11</product_brand_id>
    <product_price>0.0000</product_price>
    <product_price_ex_tax>0</product_price_ex_tax>
    <product_price_local_tax>0.0000</product_price_local_tax>
    <product_created_datetime>2024-03-06 20:00:28</product_created_datetime>
    <product_code></product_code>
    <product_barcode></product_barcode>
    <product_is_unorderable>0</product_is_unorderable>
    <product_is_shipping_required>0</product_is_shipping_required>
    <product_uri>/products/hide-polymer-combo-skimmer-lid/</product_uri>
  </product>
  <product>
    <product_id>169</product_id>
    <product_title><![CDATA[Hide Polymer Skimmer Lids]]></product_title>
    <product_content><![CDATA[## All the Features of Stainless — No Earthing Required The HIDE Full Polymer Skimmer Lid is the bond-free member of the HIDE range. Made from fully non-conductive polymer, it delivers the same seamless, flush-finish look and key-only safety as the stainless steel series, but is the smart choice for installations where earthing (bonding) is difficult or unachievable — such as renovations.Filled with your choice of matching tile, stone, paver, concrete or decking, the lid disappears into your pool surround. It's available in 306mm and 342mm square sizes, in 20mm and 30mm depths to suit common tile and paver thicknesses, and in three colours — Ash, Bone and Charcoal — so you can pick the tone that best matches your grout and surrounding finish.Install HIDE lids in new applications or when refinishing. The simple design allows for quick, affordable installation on-site by a contractor — every HIDE kit contains all the components for a no-fuss assembly. Just add your chosen inlay material.### Why Choose a HIDE Full Polymer Skimmer Lid? No earthing required — fully non-conductive polymer means no electrical bonding is needed, making it ideal where earthing isn't achievable. Seamless, designer finish — the inlay tray holds the same tile, paver, stone, concrete or decking as your pool surround, and the Ash, Bone or Charcoal frame blends with your grout and tile tones. Superior pool safety — the lid can only be opened with the HIDE Safety Key and cannot be lifted by hand, keeping it compliant with pool safety standards. Sitting flush with the surround, it also eliminates the trip hazard of a raised plastic skimmer lid. Built to last — UV-stabilised, heavy-duty polymer backed by a 5 year warranty. Easy to use and maintain — compact and easy to remove with the Safety Key, with simple occasional aftercare at little to no cost. ### What's Included in Every HIDE Polymer Kit? HIDE Safety Key — a stainless steel tool to safely and easily open and close the installed lid. Polymer Inlay Lid — a polymer tray in your chosen colour (Ash, Bone or Charcoal) that holds the landscape materials of your choice. Polymer Edge Protector — a frame set into a recess in the landscaped area, protecting your coping and surrounds from chipping or breakage. Available in skimmer lid sizes 306mm & 342mm square, with a matching polymer access cover in 206mm square to complete the look across your whole poolscape.### Choosing the Right Size & Colour Two quick measurements are all it takes: the clear underside opening of your skimmer box, and the thickness of your inlay material. Then choose the colour closest to your grout or tile undertone — warm beige/cream finishes suit Bone, cool grey tones suit Ash, and dark charcoal or graphite pavers suit Charcoal. Not sure? Contact our team with your measurements and we'll recommend the right kit.### HIDE Polymer Skimmer Lids — FAQs #### What is a HIDE Full Polymer skimmer lid? The HIDE Full Polymer skimmer lid is a non-conductive polymer inlay lid that sits over your pool skimmer box. Like the stainless steel series, the tray is filled with the same tile, paver, stone, concrete or decking used on your pool surround, creating a flush, invisible finish opened only with the HIDE Safety Key.#### Does the polymer skimmer lid need to be earthed? No. Because the lid and edge protector are made from fully non-conductive polymer, no electrical bonding (earthing) is required. This makes Full Polymer kits the preferred choice for renovations and other installations where earthing is difficult or unachievable.#### How is the polymer lid different from the stainless steel version? The Full Polymer lid has all the same features — seamless inlay finish, Safety Key-only access, pool safety compliance and flush installation — but uses heavy-duty polymer instead of 316 stainless steel, so it never needs earthing. It comes in Ash, Bone and Charcoal and carries a 5 year warranty (the stainless steel range is backed by a 10 year warranty).#### Are HIDE polymer skimmer lids pool safety compliant? Yes. HIDE's patented operating system provides safe, key-only access — the lid cannot be lifted by hand — keeping it compliant with pool safety standards. Because it sits flush with the surrounds, it also removes the trip hazard of a raised plastic skimmer lid.#### Can a HIDE polymer skimmer lid be retrofitted to an existing pool? Absolutely. HIDE polymer skimmer lids can be installed in new landscapes or retrofitted into existing pool surrounds. They're designed for quick, affordable installation by a contractor, and each kit contains all the components required.#### What inlay materials and thicknesses can I use? You can inlay whatever material matches your surrounds — tiles, stone, pavers, decking or wet-pour concrete. Kits are available in 20mm and 30mm depths to suit common inlay thicknesses, so the finished lid sits perfectly flush.#### Which colour should I choose — Ash, Bone or Charcoal? Choose the colour that best suits the undertone of your surrounding finish: warm beige or cream tiles pair well with Bone, cool grey tones with Ash, and dark charcoal or graphite pavers with Charcoal. Matching the frame to your grout gives the most seamless result.### Order HIDE Polymer Skimmer Lids from Aqua Clear Get a luxury, seamless — and bond-free — finish on your next pool or landscaping project. More product details, sizing guides, brochures and technical videos can be found at [www.skimmerlids.com.au](https://www.skimmerlids.com.au), or talk to our knowledgeable team about the right kit for your project.]]></product_content>
    <product_order>2</product_order>
    <product_icon>/media/commerce_products/169/Polymer-Bone-top-view.jpg</product_icon>
    <product_brand_id>11</product_brand_id>
    <product_price>0.0000</product_price>
    <product_price_ex_tax>0</product_price_ex_tax>
    <product_price_local_tax>0.0000</product_price_local_tax>
    <product_created_datetime>2024-03-01 01:06:44</product_created_datetime>
    <product_code></product_code>
    <product_barcode></product_barcode>
    <product_is_unorderable>0</product_is_unorderable>
    <product_is_shipping_required>0</product_is_shipping_required>
    <product_uri>/products/hide-polymer-skimmer-lids/</product_uri>
  </product>
  <product>
    <product_id>168</product_id>
    <product_title><![CDATA[Hide Stainless Skimmer Lids]]></product_title>
    <product_content><![CDATA[## A New Breed of Hidden Cover Beautifully tiled pools and landscaped courtyards with HIDE covers showcase thoughtful design and innovative construction techniques. The HIDE Stainless Skimmer Lid is a marine grade 316 stainless steel inlay lid that replaces dated plastic skimmer box lids with a premium, flush-finish tray — filled with your choice of matching tile, stone, pavers, concrete or decking, it simply disappears into your pool surround.Install HIDE lids in new applications or when refinishing an existing pool. The simple design allows for quick, affordable installation on-site by a contractor — every HIDE kit contains all the components for a no-fuss assembly, resulting in a superior finish. Just add your chosen inlay material. ### Why Choose a HIDE Stainless Skimmer Lid? Seamless, designer finish — the inlay tray holds the same tile, paver, stone, concrete or decking as your pool surround, so the skimmer lid blends in beautifully instead of standing out. Superior pool safety — the lid can only be opened with the stainless steel HIDE Safety Key, keeping it 100% compliant with pool safety standards. Sitting flush with the surround, it also eliminates the trip hazard of a raised plastic skimmer lid. Built to last — marine grade 316 stainless steel resists corrosion, even in saltwater pools, and every HIDE product is backed by a 10 year warranty. Protects your landscape — the stainless steel edge protector prevents chips and breakages in tiled or stone surrounds when the lid is opened and closed. Easy to use and maintain — compact and easy to remove with the Safety Key, with simple occasional aftercare at little to no cost. ### What's Included in Every HIDE Kit? HIDE Safety Key — a stainless steel tool to safely and easily open and close the installed lid. HIDE Inlay Lid — a 316 stainless steel tray that holds the landscape materials of your choice. HIDE Edge Protector — a stainless steel frame set into a recess in the landscaped area, protecting your coping and surrounds from chipping or breakage. ### Choosing the Right Size Two quick measurements are all it takes: the clear underside opening of your skimmer box, and the thickness of your inlay material (tiles, stone, pavers, decking or wet-pour concrete). HIDE stainless skimmer lids are available in a range of kit sizes and depths so the finished surface sits perfectly flush with the rest of your pool deck or patio. Not sure which kit you need? Contact our team with your measurements and we'll recommend the right one. ### HIDE Stainless Skimmer Lids — FAQs #### What is a HIDE stainless skimmer lid? A HIDE stainless skimmer lid is a marine grade 316 stainless steel inlay lid that sits over your pool skimmer box. Instead of a visible plastic lid, the tray is filled with the same tile, paver, stone, concrete or decking used on your pool surround, creating a flush, invisible finish. The lid is opened with the supplied HIDE Safety Key whenever the skimmer basket needs emptying. #### Are HIDE skimmer lids pool safety compliant? Yes. HIDE skimmer lids are 100% compliant with pool safety standards. They can only be accessed with the stainless steel HIDE Safety Key, keeping children and pets out, and because they sit flush with the surrounds they remove the trip hazard posed by raised plastic skimmer lids. #### Can a HIDE skimmer lid be retrofitted to an existing pool? Absolutely. HIDE stainless skimmer lids can be installed in new landscapes or retrofitted into existing pool surrounds. They're designed for quick, affordable installation by a contractor, and each kit contains all the components required. #### What inlay materials can I use? You can inlay whatever material matches your surrounds — tiles, stone, pavers, decking or wet-pour concrete. Kits are available in different depths to suit your inlay thickness, so the finished lid sits perfectly flush. #### Will the stainless steel rust in a saltwater pool? No. HIDE skimmer lids are made from marine grade 316 stainless steel, which is highly corrosion resistant even in saltwater pools, and extremely durable. Every HIDE product is backed by a 10 year warranty. #### Does a HIDE skimmer lid need to be earthed? Yes. As with all stainless steel products installed around a pool, HIDE skimmer lids must be earthed (bonded) to the pool structure by a licensed electrician, regardless of their distance from the pool. #### How do I clean and maintain a HIDE skimmer lid? Aftercare is easy and requires only occasional attention at little to no cost. Simply open the lid with the HIDE Safety Key to access the skimmer box as normal, and rinse the stainless steel components as part of your regular pool-side maintenance. ### Order HIDE Stainless Skimmer Lids from Aqua Clear Get a luxury, seamless finish on your next pool or landscaping project. More product details, sizing guides, brochures and technical videos can be found at [www.skimmerlids.com.au](https://www.skimmerlids.com.au), or talk to our knowledgeable team about the right kit for your project.]]></product_content>
    <product_order>0</product_order>
    <product_icon>/media/commerce_products/168/HIDE-Concrete-Collar.webp</product_icon>
    <product_brand_id>11</product_brand_id>
    <product_price>0.0000</product_price>
    <product_price_ex_tax>0</product_price_ex_tax>
    <product_price_local_tax>0.0000</product_price_local_tax>
    <product_created_datetime>2024-02-20 19:55:56</product_created_datetime>
    <product_code></product_code>
    <product_barcode></product_barcode>
    <product_is_unorderable>0</product_is_unorderable>
    <product_is_shipping_required>0</product_is_shipping_required>
    <product_uri>/products/hide-skimmer-lids/</product_uri>
  </product>
</root>
