+64 9 273 4103

Salt Stain Remover

Enquire Enquire
Lo-Chlor Enquire About This Product Enquire About This Product


  • Description
  • Downloads


Anhydrous blend of Citric acid and other inert ingredients

Features & Benefits

  • Removes stains caused by iron in swimming pools
  • Can be used on all surfaces
  • Ideal for pools where salt stains are common

Dosage and application

  • 1Kg treats 50,000 Litres pool water

Tips from the stain experts...

Iron and Manganese stain removal

  • Remove Chlorine and ensure pH is 7.2 to 7.6.
  • Add 1 Kg of Lo-Chlor Salt Stain Remover, by sprinkling around the outside of the pool.
  • Filter as normal.
  • The stain should be gone within twelve hours.
  • If in the unlikely event this does not remove all the stain, repeat with another 1 Kg.
  • When the stain is gone, add 1 Litre of Lo-Chlor Metal Solution.
  • Do not Superchlorinate for 10 days after adding Metal solution, or the stain will return immediately.
  • It takes about 10 days to 2 weeks for Metal Solution to get rid of a stain.
  • If the stain was severe it may be necessary, after stain removal, to adjust pH to 7.8 to 8.0 and add 1 Litre Lo-Chlor Maxi Floc Plus.
  • Making the pool alkaline and then floccing will remove about 70% of the dissolved metals.
  • Leave overnight and then vacuum to waste.
  • Balance the water and then add 1 Litre of Lo-Chlor Metal Solution.

For a salt water pool this treatment may need to be repeated every six months!

© 2024 Aqua Clear Products Ltd. All rights reserved. Website design by fuel.